Polycom 501SIP, IP500 Installing SoundPoint IP 500/501 SIP, Connecting Network and Power Source

Installing SoundPoint® IP 500/501 SIP

This section provides basic installation instructions and information for obtaining the best performance with the Sound- Point® IP 500/501 SIP phone. If you re- quire additional information or assistance with your new phone, please contact your system administrator.

The SoundPoint® IP 500/501 SIP User Guide includes regulatory compliance information that your system administra- tor should review and can also be found at http://www.polycom.com.

Connecting Network and Power Source

AC Power Option

Connect the keyed end of the sup- plied Network Cable to the LAN jack on the phone, and connect the shorter end to the Network (LAN) port. Connect the DC plug of the AC wall adapter into the supplied LAN cable as shown.

In-Line Power Option

If the phone is connected to a compatible Ethernet switch that can provide in-line power, the phone will use that power option. Simply plug the keyed end of the In-Line Power Cable (optional accessory) into the LAN jack on the phone and connect the shorter end of this cable to an available Power and Data port on the In-Line Power switch. The AC wall adapter is not required when using In-Line power.

LAN PC HEADSET HANDSET

LAN PC HEADSET HANDSET

Cisco™Catalyst™ In-Line

Power Switch

IEEE 802.3af compliant

In-Line Power switch

Cisco™ In-Line Power Cable

(Part No.2457-11014-002)

OR

IEEE 802.3af In-Line

Power Cable

(Part. No 2457-11077-002)

2