Polycom IP501 manual Installing SoundPoint IP 500/501 SIP, Connecting Network and Power Source

Page 5

Installing SoundPoint® IP 500/501 SIP

This section provides basic installation instructions and information for obtaining the best performance with the Sound- Point® IP 500/501 SIP phone. If you re- quire additional information or assistance with your new phone, please contact your system administrator.

The SoundPoint® IP 500/501 SIP User Guide includes regulatory compliance information that your system administra- tor should review and can also be found at http://www.polycom.com.

Connecting Network and Power Source

AC Power Option

Connect the keyed end of the sup- plied Network Cable to the LAN jack on the phone, and connect the shorter end to the Network (LAN) port. Connect the DC plug of the AC wall adapter into the supplied LAN cable as shown.

In-Line Power Option

If the phone is connected to a compatible Ethernet switch that can provide in-line power, the phone will use that power option. Simply plug the keyed end of the In-Line Power Cable (optional accessory) into the LAN jack on the phone and connect the shorter end of this cable to an available Power and Data port on the In-Line Power switch. The AC wall adapter is not required when using In-Line power.

LAN

PC

HEADSET HANDSET

LAN

PC

HEADSET HANDSET

Cisco™Catalyst™ In-Line

Power Switch

IEEE 802.3af compliant

In-Line Power switch

Cisco™ In-Line Power Cable

(Part No.2457-11014-002)

OR

IEEE 802.3af In-Line

Power Cable

(Part. No 2457-11077-002)

2

Image 5
Contents Transfer CallLists SpeedDial Time&Date Redial ForwardDel MenuContents Part 15 Rules ModificationsIntroduction Parts ListConnecting Network and Power Source Installing SoundPoint IP 500/501 SIPAC Power Option In-Line Power OptionPhone.Optional Connecting the Handset and Optional HeadsetAttaching the Base Features Key Descriptions Feature Key DescriptionUsing the Handset Using SoundPoint IP 500/501 SIPUsing Hands-Free Speakerphone Mode Using the HeadsetCall Hold and Resume Answering a CallMultiple Calls on Hold Microphone MuteLocal Conferencing General Key UseSplitting a Conference Transferring a CallVolume Adjustment Call TimerEnding a Call RedialDo Not Disturb Headset Memory ModeTime and Date Display ContrastCall Lists Ring TypeContact Directory See also Distinctive Ringing / Call TreatmentTo search for a particular contact Speed DialMultiple Keys Per Line Multiple LinesShared Lines Multiple Call AppearancesSelect Message Center*,† Voice MailDistinctive Ringing / Call Treatment Basic, Preferences, Language Phone RebootMultilingual Support Localization Text Messaging Optional FeaturesPresence / Status / Buddy Lists Select Instant MessagesTures, Presence To view and change Presence settingsNo Dial-Tone TroubleshootingNo Display, Incorrect Display or Bad Contrast No RingingNo Response from Feature Key Presses Safety and ComplianceClass B Digital Device or Peripheral Display shows Network Link is DownPolycom Limited Warranty and Limitation Liability Exclusions Warranty ExclusiveService Agreements Disclaimer Limitations of LiabilityGoverning Law Copyright NoticeSoftware is Provided AS Polycom, Inc Barber Lane Milpitas, CA