Polycom MD4000 manual Protocol field, type Click the Save button

Page 13

MeshDynamics 4000 Series APs

4.Select the previous rule (Ethernet Type …).

5.Click the Add Rule button.

6.In the Rule Properties dialog box:

a.Let Criteria be IP Protocol.

b.In the Protocol field, type 119.

c.Click the Save button.

PN: 1725-36164-001_B.doc

13

Image 13

Contents MeshDynamics Trademark Information Introduction Service InformationCertified Product Summary Network Topology Initial Configuration Settings Configuration Settings Configuring Interfaces Enter the Essid to match the SpectraLink Wireless Telephones MeshDynamics 4000 Series APs Reboot the Node for settings to take effect QOS SettingsWPA2-PSK setup Security SettingsEffistream Settings Protocol field, type Click the Save button Under Rules, select IP Protocol=119 Further Assistance