Polycom MD4000 manual MeshDynamics 4000 Series APs

Page 9

MeshDynamics 4000 Series APs

c.If SpectraLink Wireless Telephones are configured for 802.11g only, select the 11g check box for 2.4G Mode.

All rates are set as basic rates; multicast traffic will be transmitted at the lowest basic rate for each band (1Mb/s for 802.11b, 6Mb/s for 802.11g, and 6Mb/s for 802.11a).

PN: 1725-36164-001_B.doc

Image 9

Contents MeshDynamics Trademark Information Service Information IntroductionCertified Product Summary Network Topology Initial Configuration Settings Configuration Settings Configuring Interfaces Enter the Essid to match the SpectraLink Wireless Telephones MeshDynamics 4000 Series APs Reboot the Node for settings to take effect QOS SettingsWPA2-PSK setup Security SettingsEffistream Settings Protocol field, type Click the Save button Under Rules, select IP Protocol=119 Further Assistance