Polycom MD4000 manual Security Settings, WPA2-PSK setup

Page 11

MeshDynamics 4000 Series APs

Security Settings

WPA2-PSK setup

1.Click the Security tab in the Node Configuration window.

2.Click the WPA Personal option.

3.At Mode, select WPA2/802.11i from the drop-down list.

4.Enter a Passphrase that matches the entry on the SpectraLink Wireless Telephones.

5.Click the Save button.

6.Reboot the Node for settings to take effect.

PN: 1725-36164-001_B.doc

11

Image 11

Contents MeshDynamics Trademark Information Certified Product Summary Service InformationIntroduction Network Topology Initial Configuration Settings Configuration Settings Configuring Interfaces Enter the Essid to match the SpectraLink Wireless Telephones MeshDynamics 4000 Series APs Reboot the Node for settings to take effect QOS SettingsWPA2-PSK setup Security SettingsEffistream Settings Protocol field, type Click the Save button Under Rules, select IP Protocol=119 Further Assistance