Polycom MD4000 manual Configuring Interfaces

Page 7

MeshDynamics 4000 Series APs

Configuring Interfaces

1.Right-click the access point icon (Node).

2.Select Configure Node from the shortcut menu to begin configuration.

3.Click the Interfaces tab in the Node Configuration window.

4.Select the appropriate radio interface:

a.Click the 5G Down Link option if the SpectraLink Wireless Telephones are configured for 802.11a.

b.Click the 2.4G Client AP option if the SpectraLink Wireless Telephones are configured for 802.11b & b/g mixed mode or 802.11g only.

PN: 1725-36164-001_B.doc

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents MeshDynamics Trademark Information Introduction Service InformationCertified Product Summary Network Topology Initial Configuration Settings Configuration Settings Configuring Interfaces Enter the Essid to match the SpectraLink Wireless Telephones MeshDynamics 4000 Series APs Reboot the Node for settings to take effect QOS SettingsWPA2-PSK setup Security SettingsEffistream Settings Protocol field, type Click the Save button Under Rules, select IP Protocol=119 Further Assistance
Top Page Image Contents