be established within 60 seconds, VoiceStation™ 500 will revert to POTS mode.
Initiating Bluetooth Mode:
Configuring the VoiceStation™ 500 for Bluetooth Mode
1.Press the Mode button to enter Blue- tooth mode. The blue Mode LED should be on (either slow blinking or steady).
2.Press the Mode button again. Hold for at least 3 seconds and ensure the blue LED is fast blinking (discover- ing).
You will hear a series of tones on VoiceStation™ 500 indicating that your Bluetooth device has discovered and paired with the VoiceStation™ 500.
On your Bluetooth device, select
VS500 as the discovered device and when prompted for the Password, enter ‘0000’. Once the Bluetooth- enabled device is paired and linked with VoiceStation™ 500, the blue
LED should be steady (On). A con- firmation tone will also be heard on the VoiceStation™ 500.
3.Refer to the following sections for use with either a mobile phone or computer.
Using VoiceStation™ 500 with Bluetooth-Enabled Mobile Phone:
Making and ending a Bluetooth mobile phone call
1.Press the Mode button to enter Blue- tooth mode. The blue Mode LED should be on (steady).
2.Dial the phone number on the Blue-
3.When finished, terminate the call as you normally would with your mobile phone, computer or press the On/Off button on VoiceStation™ 500.
Answering a mobile phone call on VoiceStation™ 500
1.Ensure the mobile phone is paired and linked with the VoiceStation™
500. See “Initiating Bluetooth Mode” for more information.
2.When the mobile phone rings, an- swer the call on your mobile phone as you normally would or
3.Press the On/Off button on the VoiceStation™ 500.
Ending the mobile phone call using VoiceStation™ 500
1.Disconnect the call on your mobile phone as you normally would, or ;
2.Press the On/Off button on the VoiceStation™ 500.
Redialing the last dialed number using VoiceStation™ 500
•Press the On/Off button on VoiceStation™ 500 to dial the last dialed number on the mobile phone.
NOTE: If you are in Bluetooth mode and want to make a POTS call, you must first push the Mode button to exit Bluetooth mode, then press the
On/Off button to initiate the POTS call.
VoiceStation™ 500 - 9