NuTone VSUC4SK installation instructions Using #8 Machine Screws and Threaded Mounting Shafts

Page 16

•Position the round plastic spacer at each mounting hole location. To help hold the spacers in-place, position the small diameter end of the spacer towards the TV/Monitor case. Lift and hold the TV/Monitor in position. Select a 7/8", 1 1/4", or 1 1/2" mounting screw (supplied) based on your particular installation and insert the first mounting screw into one of the mounting holes in the TV/Monitor, and tighten.

• Insert the remaining 3 mounting screws (supplied) and tighten.

•Complete all the connections on the back of the TV/Monitor, if they were not made before attaching the TV/Monitor to the cabinet.

Using #8 Machine Screws and Threaded Mounting Shafts

• From underneath the cabinet, position the mounting hole template and mark the mounting hole locations.

•From underneath the cabinet, drill a 3/16" hole at each of the marked mounting hole locations (do not drill complete thru into the inside of the cabinet).

•Measure the distance between the frame of the cabinet and the bottom of the cabinet. Combine the supplied 1/4", 1/2" and 3/4" round plastic spacers so they will fill the space between the bottom of the cabinet and the frame of the cabinet.

•Depending on the depth of the cabinet, decide if you need to make all the connections to the back of the TV/Monitor before fastening the TV/Monitor to the bottom of the cabinet.

16

Image 16

Contents Video Door Answering System Model VSUC4SK Installation CleaningImportant Safety Instructions Example of Antenna Grounding AS PER National Electrical Code Table of Contents Installation AM Antenna Installation and Connection Wiring SpecificationsAM Loop Antenna FM Antenna Installation and Connection Under the Cabinet MountingAbove the Cabinet Mounting Cabinet MountingFM Folded Dipole Antenna with 20 foot lead-in StaplingNailing Attic RafterCeiling Joist FM Antenna with 5 foot lead-inTwin-Lead Connection Telephone Connection TV Antenna/Cable System ConnectionOptional FM Antenna Connection not supplied by NuTone Camera Wiring Wiring and Mounting the CameraMaximum Number of Camera’s Frame Construction New ConstructionExisting Construction Connecting Camera 1 at the TV/Monitor Connecting Optional Camera 2 at the TV/MonitorWiring and Mounting the TV/Monitor Using #8 wood screwsUsing #8 Machine Screws and Threaded Mounting Shafts Page Camera Lens Manual Adjustment Camera Volume AdjustmentPowering Up the System FCC Information Part 15 Rules Product specifications subject to change without notice Portier vidéo électronique Modèle VSUC4SK Avertissement NettoyageImportantes Directives DE Sécurité Code Électrique National NEC Schéma DE Câblage Représentatif DU VSUC4SK Installation Table des matièresSchéma DE Câblage Représentatif DU Modèle Série VSUC4SK Spécifications de câblage Installation et connexion de l’antenne AMAntenne cadre AM Installation et connexion de l’antenne FM Montage au-dessus de l’armoireMontage au-dessous de l’armoire Montage à l’intérieur de l’armoireAntenne FM dipôle pliante avec descente d’antenne de 20 pi AgrafageClouage Fixation à un chevronFixation à une solive Antenne FM avec descente d’antenne de 5 piConnexion au câble à deux conducteurs Connexion du téléphone Connexion du système antenne/câblodistributionConnexion de l’antenne FM en option non fournie par NuTone Câblage de la caméra Nombre maximal de camérasCâblage et montage de la caméra Construction du cadre nouveau bâtimentBâtiment existant Connexion de la caméra 1 au télémoniteur Connexion de la caméra 2 en option au télémoniteurCâblage et montage du télémoniteur Montage avec vis à bois noMontage avec vis mécaniques no 8 et écrous cylindriques Page Réglage manuel de la lentille de la caméra Réglage du volume de la caméraMise en marche du système Règlement de la FCC, Partie