Attaching the Camera

(DP-XXXXC)

The DP-5xxxC and DP-6xxxC come with a mini camera that can be attached to the integrated mount that allows the camera to see through the opening in the plate. The illustrations bellow show how to mount the camera.

Mini Pinhole Camera

Threaded Mounting Hole

Cone Lens

Break away the section of perforated metal screen that covers the camera opening by pushing a screwdriver through the slot on the front of the door plate. Press near the top or bottom of the section and the tabs that hold it in place will break free. Attach the camera to the mount so that the cone of the camera points through the opening. Adjust the camera to the desired position and secure it in place by tightening the screw in the mount.

Completed Sub-assembly

(see Attaching the Companion Board)

Attach camera to mount using the screw provided

Remove this

section of screen

material

Attach pigtail to rear of

camera

Connect Intercom Hub here (see following pages for details)

Connect to power supply	7
and video distribution system