Initial Operation 9
EN
Connecting the Power Cable
Mains Voltage at Setup Location
Connecting the Mains Cable
Insert the mains cable into the connection located on the
rear side of the device. Connect the mains cable to the elec-
trical socket.
Connecting the Power Cable
Initial Installation
Starting Initial Installation
After you connect your device to the mains voltage, the in-
itial installation commences. Press i. Your device prints
a help page.

Selecting the Language

1Use [ to select the desired display language.
2Confirm with OK.

Selecting the Country

Setting the Country Correctly
Setting the Country
1Use [ to select the country in which you are operat-
ing the machine.
2Confirm with OK.
After this input, the machine prints another help page and
checks the telephone line.

Entering Your Number

Header
Your name and number are added together with date, time
and page number at the top edge of each fax transmission
(= header).
Entering Your Number
1Enter your number. Using # or * you can enter a
plus sign.
2Confirm with OK.

Entering Your Name

Entering Your Name
1Enter your name. You can enter characters using the
numeric keys (see button labels). Enter special charac-
ters using 0. Press the respective button several times
until the desired character or special character appears
on the display.
2Confirm with OK.
After the input, the machine prints an overview of the functions.

Entering the Time and Date

Entering Time/Date
1Enter the time, e.g. 1400 for 2 pm.
2Enter the date (two digits each) e.g.
080607 for 8 June 2007.
3Confirm with OK.
Help 2 ยท Initial Installation Process
Check whether the mains voltage of your device (in-
dicated on the type label) matches the mains voltage
available at the setup location.
Always set the country in which you are operating
the machine. Otherwise, your machine is not adapt-
ed to the telephone network. If your country is not
included in the list, you must select a different setting
and use the correct telephone cable for the country.
Consult your retailer.
You can move the cursor using [. Use C to de-
lete individual characters.
You can restart the initial installation process any
time. Press i and 2.