Aiphone JB-2MED operation manual Absence set Auto absence recording English, Play

JB-2MED

1

MONITOR

TALK

3

MONITOR

TALK

2

SET SET

SET SET

2/5

01/APR/04 14:30

2/5

JB-2MED

1

MONITOR

TALK

2PLAY

1.If the SET button is pressed once (less than 2 sec.), it will light and the unit will be set.

2.If the absence set (auto absence recording) is operating, the SET button flashes to show that there has been a caller (if the image is played, it goes back to being lit). When the image is played, the number of callers who came while you were out is displayed. Example: 2/5" means Second image from a total of 5.

3.Press the SET button again to cancel. The SET button light will go off.

In step 1, if pressed and held for more than 2 sec., it will enter setting mode.

NOTES: Cancellation in step 3 is not possible while the SET button is flashing. First play the recorded screen.

1. Press the PLAY button to view the newest picture.

2. Each time the PLAY button is pressed, it moves to the next picture that was previously recorded. After the final picture,

7-11

JB-2MED

[1]

01/APR/04 17:15

01/APR/04 15:30 30/MAR/04 20:25

30/MAR/04 09:48 29/MAR/04 20:03

it becomes a blue screen before returning to the first picture. Press the REC button to reverse the selection direction.

3. Press the TALK button to end. It ends automatically approx. 1 min. after the final operation.

1. In step 1, playback is not possible if there are no recorded pictures.

2. In 16-picture/4-frame mode, the REC button in step 2 is used to view each picture in a full-screen view.