Aiphone JB-2MED Answering a door call Manual mode English, Instant voice call function English

NOTES: 1. In step 2, the video and audio go off after approx. 45 seconds. If the TALK button is pressed within approx. 45 sec., it connects to the caller's entrance station.

2.In step 2, the door call-in LED of the JB-2MD and JB-2HD lights in red if called from entrance station 1, and in green if called from entrance station 2.

3.If you press the TALK button in step 4 for a short time (less than 2 sec.), communication will end.

4.Communication (video) ends automatically after approx. 1 minute. If the TALK button is pressed within approx. 30 sec., it connects again to the caller's entrance station.

1.The CALL button of the entrance station is pressed.

2.The chime tone sounds, the caller is seen on the video monitor, and the caller's voice is heard.

3.Press and hold the TALK button for 2 seconds or more.

4.Keep pressing the TALK button to talk, and release to listen to the caller.

5.Press the TALK button momentarily (less than 2 sec.) to end.

7-3

JB-2MD JB-2MED

1.The CALL button of the entrance station is pressed.

2.Even without answering, the door area can be seen and heard with video and audio (for approx. 45 sec.). Inside sound is not heard outside.

NOTES: JA-D does not have this function. Audio is only established when the call is answered.

7-4

1.Press the DOOR RELEASE button in communication or monitoring.

2.The door is unlocked.

7-5

JB-2MD JB-2MED

1.Press the MONITOR button.

2.The video monitor displays the image of entrance station 1 and the audio is heard. If you do not press the TALK button, the caller will not hear your voice.

3.Press the entrance MONITOR button again to switch to entrance station 2. If a JA-D (audio only) unit is connected to entrance 2, it is skipped (cannot be monitored).

4.Press the MONITOR button again to end.

NOTES: 1. To talk to the entrance station during monitoring, press and release the TALK button. Press the TALK button again to end the communication.

2.The entrance monitoring ends automatically after approx. 1 min. To monitor the entrance again, repeat from step 1.

3.If a call is received from another entrance station during monitoring, it switches to the calling station.

7-6

JB-2MD JB-2MED