Aiphone JB-2MED operation manual Mounting English, Options English

		3-2
3	MOUNTING

3-1

JB-2MED

MONITOR

TALK

JB-2MD	JB
JB-2HD	-2MD
	TALK

#1

[1] [2] [3]

83,5 mm (3-5/16")

	(PR)
E	[1]
SW	(BL)

P(GR)

b2	(YE)
b1		[3]
	(OG)
V -
V +	(RD)	[4]
	(BR)

JB-2M(E)D

[2]

JB-2HD

#2 #1

#1

#2

L	(BR)	[5]
L	(RD)
c1	(OG)	[6]
	(YE)
c2

1

2

9mm (3/8")

PR: Purple	PR: Violet	PR: Lila	PR: Violeta	PR: Paars
BL: Blue	BL: Bleu	BL: Blau	BL: Azul	BL: Blauw
GR: Green	GR: Vert	GR: Grün	GR: Verde	GR: Groen
YE: Yellow	YE: Jaune	YE: Gelb	YE: Amarillo	YE: Geel
OR: Orange	OR: Orange	OR: Orange	OR: Naranjo	OR: Oranje
RD: Red	RD: Rouge	RD: Rot	RD: Rojo	RD: Rood
BR: Brown	BR: Brun	BR: Braun	BR: Marrón	BR: Bruin

PS-1820		PS-1820DIN
PS-1820S		PS-1810DIN
PS-1820UL
[2]	[3]	[4]
	83,5 mm
	(3-5/16")

Mounting English

[1]Screws (x2)

[2]Mounting bracket

[3]1-gang box

[4]Din rail

1.Press the RELEASE button (to insert or remove the wire).

2.Insert the cable into the terminal.

NOTES: When a 1-gang box is not installed, the cable can be surface-run to the top or bottom of the unit. Cut the cable inlet to allow passage of the wiring into the unit.

Options English

[1]Foot switch

Connect a locally available pedal foot switch to PURPLE and BLUE wires (dry closure contact).

[2]Manual Press-to-Talk restriction

Short PURPLE and GREEN wires together to prevent manual TALK button operation.

[3]Selective door release

Please refer to the wiring diagram #9 for detail connection.

[4]Video output to video monitor, video switcher, etc. (NTSC,1 Vp-p/75Ω)

[5]Single door release

Connect BROWN and RED wires from connector #2 to a single door release (or to the RY-3DL as shown on the wiring diagram).

[6]Sensor (JB-2MED only)

NOTES: 1. For JB-2HD, only functions [1] and [2] are available.

2.Cut off unused wires and insulate the ends to prevent shorting.

3.Provide a box deep enough to accommodate all cables including options.

- 4 -