Finding a Lost Handset
With the phone in standby, press Find on the base. All the handsets will beep for 1 minute; to end the page, press Find again or press any key on any handset.
Using Multi-Handset Features
To use the features in this section, you must have at least two cordless handsets.
Expanding your phone
xx Your base supports a total of six cordless handsets: the one that came with the base and up to five XDECT R003BT accessory handsets.
xx
xx Accessory handsets must be registered to the base before you can use them. Handsets that aren't registered display a Handset not registered message. For instructions on registering handsets to
the base, see page 36, or consult the accessory handset manual.
xx xx
Any accessory handsets that came packaged with the base are already registered for you.
If a handset was previously registered to a base, you have to reset it so you can register it to a new base (see page 36 or the manual for the accessory handset).
Conference calling
xx When an outside call comes in on the land line, two handsets can join in a conference call with the outside caller.
xx xx
To join an ongoing call, press Talk/flash or Speaker.
To leave the conference call, hang up normally; the other handset remains connected to the call.
Privacy mode
You can prevent other handsets from joining a call. Start your call as usual, then press Menu/select: the display shows Call Privacy.
Press Menu/select again to turn privacy mode on (you’ll see 
in the display). When you hang up, privacy mode turns off automatically.
22