To... | Follow these steps: | |
| Press Clear/intercom, then select the | |
make an intercom page | handset you want to talk with (select | |
All to page all handsets at the same | ||
| ||
| time). | |
cancel a page | Press End. | |
answer an intercom page | Press Clear/intercom or Talk/flash. | |
leave an intercom call | Press End. | |
| Press Talk/flash or Link (depending | |
answer an outside call | on which line is ringing). The phone | |
automatically disconnects the | ||
during an intercom call | ||
intercom call and connects you to the | ||
| ||
| outside line. |
Using Special Features
Do Not Disturb (DND)
xx The Do Not Disturb feature (DND) turns off the ringers on the base and all handsets at the same time.
xx You can turn on DND from the base whenever the phone is in standby: just press and hold Do not disturb for about a second.
The phone automatically turns on the answering system and shows Do Not Disturb on all handsets.
xx To turn DND off, press Do not disturb again.
xx If you turn the answering system off while DND is on, the phone turns off DND along with the answering system.
Chain dialing
xx
xx
xx
If you often have to enter a series of digits or a code number during a call, you can save that code number to a phonebook entry and use the phonebook to send the code number.
Enter the code number (up to 20 digits) into the phonebook just like a regular phonebook entry. Be sure to enter the code number into the phonebook exactly as you would enter it during a call. When you hear the prompt that tells you to enter the number, open the phonebook and find the entry that contains your code
24