Uniden XDECT R035BT manual Registering Repeaters, Try, You don’t hear a dial tone, Over at step

Page 41

In about 30 seconds, the handset display should say Registration Complete. Press TALK/FLASH and make sure you get a dial tone.

If...	Try...
- you don’t hear a dial tone	Making sure the handset is
- the display says Registration Failed	fully charged, then starting
	over at step 1.

Registering Repeaters

If you are having trouble with a repeater or if you want to replace one, you need to register the repeater to the base.

TIP: Connect the repeater close to the base for easy access to the necessary keys and indicators. Locate the repeater in the desired position after registration is complete.

1. On the base, press and hold FIND when the phone is in standby.

2. On the bottom of the repeater you want to register, press and hold the registration button until the LINK light blinks rapidly.

ht doesn't turn on,

3.In about 90 seconds, the LINK light on the repeater will turn on. The repeater has been registered to the base.

If the LINK light doesn't turn on, try these steps again.

Image 41

Contents Xdect R035 Page Whats in the box? You will also find Setting Up the MobileLink Important Safety InstructionsGetting Started Installing Your PhoneCharge the battery Test the connection Setting Up the MobileLink Bluetooth ConnectionConnect the telephone cord Visit our website for more information on compatible models Pair your Bluetooth phoneTo test the connection Using the Xdect R035BT with two Bluetooth phonesConnect the repeater/charger power cord Installing the Repeater/Chargers if includedAttach the stand Place the repeater/charger on the wallHow it works Using the RepeaterPlacing repeaters Picking the best spot Testing the locationBase keys and how they work Understanding Your PhoneParts of the base Standby start playing messages Speaker volumeMessages Ringer for this call onlyUp one line Parts of the handsetCaller ID list RightDown one line Unlock the keypadStandby open the menu Menu or any list selectIcon What it means Display icons and what they meanUsing the Menus Aids see CoilRinger Tones Personal RingHow to enter text on your phone From the land line From the cell Phone Using Your PhoneLearning the Basics Call Waiting Change the volumeSpeaker and earpiece volume Ringer volume Caller ID List Redial List Using Caller ID and Redial ListsTo… Follow these steps… Using the PhonebookPhonebook menu options Privacy mode Using Multi-Handset FeaturesFinding a Lost Handset Expanding your phoneIntercom To… On the land line Using MobileLinkCall transfer Follow these steps Using Special FeaturesDo Not Disturb DND Chain dialingVoice message notification Using the Answering SystemAnswering System Options Ans. Setup Accessing the Answering System Personalizing Your Greeting Switch between the two greetingsRecord your personal outgoing message or greeting Delete your greetingTo… From the base Remote Operation Getting Your MessagesFrom a handset Screening Your Calls Using the System While You’re Away from HomeFrom the base From a handset Programming a security codePage If… Try… Solving ProblemsImportant Information Adjusting the handset volume Doesn’t ring when my Base Cellular phone doesSetting your cellular phone to transfer Audio to a Bluetooth device. CheckNoise or static on the line Weak or hard to hear audioDo you use a T-Coil hearing aid? Installing a line filter or DSL filterLocation Locations Handset Base Liquid damageDo you have the base the handset is registered to? Yes Resetting and Registering HandsetsRegistering a handset Does the handset fit in the base cradle? YesTry Registering RepeatersYou don’t hear a dial tone Over at stepPage AC Adapter and Battery Information Index Wall Mount the Repeater Warranty Service Division Princes Highway

Try...

- you don’t hear a dial tone

over at step 1.

Registering Repeaters

ht doesn't turn on,