Uniden T H E E X S 9 9 6 6 manual Direct wall plate mounting

Page 10

8

tDirect wall plate mounting

If you don't have a standard wall plate, you can mount your phone directly to the wall. Before doing this, consider the following:

lAvoid electrical cables, pipes, or other items behind the mounting location, that could cause a hazard when inserting screws into the wall.

lTry to mount your phone within 10-15 feet of a working phone jack to avoid excessive cord lengths.

lMake sure the wall material is capable of supporting the weight of the base and handset.

lUse #10 screws (minimum length of 1-3/8 inches) with anchoring devices suitable for the wall material where the base unit will be placed.

1. Insert two mounting screws into the wall, (with their appropriate anchoring device), 3-15/16 inches apart. Allow about 3/16 of an inch between the wall and screwheads for mounting the phone.

2. Refer to steps 1 through 9 on page 6 and 7 to mount the telephone.

Image 10

Contents

R E a D Spectrum Controls and Functions Contents Features WelcomeIncluded in Your Package Selecting a Location DESK/TABLETOP Installation Wall Installation Standard wall plate mountingPage Direct wall plate mounting Installing the Handset Battery Pack Initial battery charging Charging the Battery PackCharging optional battery packs Low battery indicator Cleaning the Battery ContactsSetting the PULSE/TONE Switch When the battery pack is very low and needsAdjusting the Volume Controls To attach the beltclip Installing the BeltclipHeadset Installation To remove the beltclipHandset in the base To reset the digital security codeAutomatic Digital Code Security Replace the handset back on the baseMaking and Receiving Calls Basic 2-line operationAnswering a Call from the Base Making a Call from the Base Dialing from Talk ModeMaking a Call from the Handset Dialing from Standby Mode Using the Tone FeatureFlash and Call Waiting To redial from the handset Using RedialPlacing a Call on Hold To redial from the baseUsing the page Feature Using the Mute FeatureYou can hear the party on line 1, but they cannot hear you Line Operation Extension In UseWAY Conferencing Press on the handset to answer Press on the base Using Your EXS 9966 IntercomFrom the Base to the Handset Press on the handset. If no answer, press to disconnectHandset displays and Hold Line 1 LED on the base turns red Transferring a CallFrom Handset to Base Line 1 LED turns redTraveling OUT-OF-RANGE On the Handset Del key deletes characters as the cursor moves leftPress memory. The status LED blinks When entering numbers, you may press pauseOn the Base Confirmation beep indicates the number is storedEditing a Phone Number in Memory Use the and key to move Cursor left and rightPress and hold del to clear the entire number Press select Erasing a Number from Memory From the HandsetFrom the Base Press mem Handset displays your programmed memory locations Using Memory DialingStandby Mode Dialing from the Handset Press line 1. The number dialsPress line 1. The line 1 LED lights Talk Mode Dialing from the HandsetDialing from the Base Number dialsSetting up Caller ID options Using Caller IDTurning AutoTalk and Caller ID/Call Waiting On or Off Programming Your Area Code If you want to set CIDCW, useKey or 2 to move the cursor Screening your callsReviewing Caller ID name/numbers Select the name/number that you would like to dial Storing a Caller ID number in a memory location Press mem to store the selected messageDeleting a Caller ID message Scan backwards Press del Following screen appearsDeleting all Caller ID name/numbers Using Cidcw Caller ID with Call Waiting Troubleshooting Quick Reference ChartBase Unit GeneralHandset At Uniden, we’ll take care of you Thank YOU