Uniden T H E E X S 9 9 6 6 manual Wall Installation, Standard wall plate mounting

Page 8

Place the power cord so that it does not create a trip hazard or where it could become chafed and create a fire or electrical hazard.

DO NOT use an outlet controlled by a wall switch.

6

WALL INSTALLATION

Standard wall plate mounting

This phone can be mounted on any standard telephone wall plate.

1 Snap the wall mount adapter into the notches on the base.

2. Plug the telephone line cord to the TEL LINE 1/2 jack and the AC adapter to the DC IN 10V jack.

3.Plug the telephone line cord into the telephone outlet.

4.Wrap the AC adapter cord inside the

molded wiring channel. Then wrap the cord around the strain relief notch.

5. Plug the AC adapter into a standard

120V AC wall outlet.

6. Raise the antenna to a vertical position.

7. Align the mounting slots on the base with the mounting posts on the wall. Push in and down until the phone is firmly seated.

Image 8

Contents

R E a D Spectrum Controls and Functions Contents Features WelcomeIncluded in Your Package Selecting a Location DESK/TABLETOP Installation Wall Installation Standard wall plate mountingPage Direct wall plate mounting Installing the Handset Battery Pack Charging optional battery packs Charging the Battery PackInitial battery charging Cleaning the Battery Contacts Setting the PULSE/TONE SwitchLow battery indicator When the battery pack is very low and needsAdjusting the Volume Controls Installing the Beltclip Headset InstallationTo attach the beltclip To remove the beltclipTo reset the digital security code Automatic Digital Code SecurityHandset in the base Replace the handset back on the baseMaking and Receiving Calls Basic 2-line operationAnswering a Call from the Base Making a Call from the Handset Dialing from Talk ModeMaking a Call from the Base Flash and Call Waiting Using the Tone FeatureDialing from Standby Mode Using Redial Placing a Call on HoldTo redial from the handset To redial from the baseYou can hear the party on line 1, but they cannot hear you Using the Mute FeatureUsing the page Feature Line Operation Extension In UseWAY Conferencing Press on the handset to answer Using Your EXS 9966 Intercom From the Base to the HandsetPress on the base Press on the handset. If no answer, press to disconnectTransferring a Call From Handset to BaseHandset displays and Hold Line 1 LED on the base turns red Line 1 LED turns redTraveling OUT-OF-RANGE On the Handset Del key deletes characters as the cursor moves leftWhen entering numbers, you may press pause On the BasePress memory. The status LED blinks Confirmation beep indicates the number is storedEditing a Phone Number in Memory Use the and key to move Cursor left and rightPress and hold del to clear the entire number Press select Erasing a Number from Memory From the HandsetFrom the Base Using Memory Dialing Standby Mode Dialing from the HandsetPress mem Handset displays your programmed memory locations Press line 1. The number dialsTalk Mode Dialing from the Handset Dialing from the BasePress line 1. The line 1 LED lights Number dialsTurning AutoTalk and Caller ID/Call Waiting On or Off Using Caller IDSetting up Caller ID options If you want to set CIDCW, use Key or 2 to move the cursorProgramming Your Area Code Screening your callsReviewing Caller ID name/numbers Select the name/number that you would like to dial Storing a Caller ID number in a memory location Press mem to store the selected messageDeleting a Caller ID message Scan backwards Press del Following screen appearsDeleting all Caller ID name/numbers Using Cidcw Caller ID with Call Waiting Troubleshooting Quick Reference ChartHandset GeneralBase Unit At Uniden, we’ll take care of you Thank YOU