SpectraLink Corporation | Link WTS Installation and Operation |
1. About This Document
This document explains installation and operation of SpectraLink’s Link Wireless Telephone System (WTS), using the Link 150 Model 3 (M3) Master Control Unit (MCU). The Link 150 M3 MCU adds wireless service to your existing telephone system. The installation process connects the Link Wireless Telephone System to your telephone system, and activates SpectraLink Wireless Telephones.
1.1Questions?
SpectraLink wants you to have a successful installation. If you have questions please contact
SpectraLink Customer Support Hotline at (800)
The Hotline is open Monday through Friday, 7:00 AM to 6:00 PM Mountain Time.
1.2Icons and Conventions
This manual uses the following icons and conventions.
!
NORM
Caution! Follow these instructions carefully to avoid danger.
Note these instructio ns carefully.
This typeface indicates a key, label, or button on the MCU or Wireless Telephone.
1.3Installation Overview
Installation has three phases. In most cases, a separate person is responsible for each phase.
∙Site preparation and wire installation – this is usually done by a wire technician or contractor.
∙Installing the SpectraLink system – this is done by SpectraLink or one of our certified distributors.
∙Programming the customer's telephone system to work with the SpectraLink system– this is usually done by the customer’s system administrator or technician.
Because these major steps require some parallel activities, it is important to coordinate the activities among the persons involved.
Part Number: | Page 1 |
