SpectraLink 150 M3 MCU manual

SpectraLink Corporation Link WTS Installation and Operation

12.4 Examples of Programming

Transfer:

On your telephone system, the Transfer feature is accessed using Flash * 7. On the Wireless Telephone, Transfer will be accessed using FCN 2.

With the Mode switch in the ADMIN position, key in the following sequence on the Administrative Wireless Telephone:

START,FCN, 2

START(flash),*,7,END

Speed Dial:

You want FCN 4 to dial 555-1234. The system must access an outside line by dialing 9 and wait for dial tone, then dial the call. Key in the following sequence on the Administrative Wireless Telephone:

START,FCN,4

9,FCN(pause),FCN(pause),5,5,5,1,2,3,4,END

The number of pause entries depends upon how quickly your telephone system accesses outside dial tone.

Clear or Erase A Function:

You want to clear FCN 5 from memory. Key in the following:

START,FCN,5,END

Remember that when you change or delete a function using the Administrative Wireless Telephone, you will change or delete that function on all Wireless Telephones.

Part Number: 72-0075-01-C-W.doc Page 44