SpectraLink Corporation | Link WTS Installation and Operation |
8.6Replace a Base Station
To replace a Base Station, unplug the existing Base Station and plug in the new Base Station.
∙The LED will blink red and green as the system software downloads to the Base Station and the Base Station is tested.
∙When the LED blinks amber, the system is ready for operation.
∙When the LED blinks green, a Wireless Telephone has established a radio link with that Base Station.
∙If the LED turns solid red, there should be an error message on the MCU's status LEDs and the MCU Error LED should be lit.
Part Number: | Page 37 |
