Philips TD4454Q How to make a 3-way conference Call, During the conference call, Call waiting

Page 17

Press on the calling handset

Your desired handset rings.

Press on the called handset

The intercom is established.

Note

If the called handset is busy, a busy tone will be emitted from the calling handset.

4.6.2How to transfer an external call to another handset

During an external call :

Press to initiate an internal call

The handsets available for intercom will be displayed and the external call is put on hold automatically.

Press / to select your desired handset

Press to call your desired handset

Your desired handset rings.

Press on the called handset to start intercom

Note

You can press to switch the call between the internal call and the external call.

Press on the calling handset

The calling handset transfers the external call to the called handset.

4.6.3How to make a 3-way conference

call

The conference call feature allows one external call to be shared with two handsets (in intercom). The three parties can share the conversation and no network subscription is required.

During an external call :

Press to initiate an internal call

The handsets available for intercom will be displayed and the external call is put on hold automatically.

Press / to select your desired handset

Press to call your desired handset

Your desired handset rings.

Press on the called handset to start intercom

Note

You can press to switch the call between the internal call and the external call.

Long press on the calling handset

The calling handset, called handset and the external call would be in 3-way conference.

During the conference call :

Press to put the external call on hold and go back to internal call

The external call is put on hold automatically. Press and hold to establish the

conference call again

Note

Any handset hangs up during a conference call will leave the other handset still in connection with the external call.

4.6.4Caller Line Identification (CLI) Caller Line Identification (CLI) is a special service that you may subscribe from your network operator. If you have subscribed to CLI service and provided that the identity of the caller is not withheld, the number or name of the caller will be displayed when the phone rings so that you may decide whether to answer the call or not. Please contact your network provider for more information on this service.

4.6.5Call waiting

If you have subscribed to Call Waiting service, the earpiece will emit a beep tone to inform you that there is a second incoming call.The number or name of the second caller will also be displayed if you have subscribed to Caller Line Identification service (CLI). Please contact your network provider for more information on this service.

To answer the second call, press .

4.7How to find a handset

You can locate the handset by pressing on the base station.

All the handsets registered to the base will produce the paging tone and you can stop the

paging by pressing / / / on the

handset or on the base again.

Using your phone

15

Image 17
Contents Page Page Table of contents Answering machine Important Safety Instructions Safety information Causing serious damage to the productPower requirements Battery requirementsWarranty Safety precautionsTelephone connection Conformity Environmental careLine cord Your phoneWhat’s in the box Menu/OK key Overview of the phone Handset Event LEDRedial/Mute/Next key DCall log/Up keyGTalk on/R key Talk off/Exit keyHAlphanumeric keypad Hash keyDisplay icons on the handset LED Message counter Base station Stop / Play keyAnswering machine ON/OFF key DErase keyConnect the base station Caution Slide out the battery coverGetting started How to power off or on the handset power Configure your phonePlace the handset on the charging cradle TipUsing your phone Init 2NDCALL How to find a handset How to make a 3-way conference CallDuring the conference call Call waitingUse more of your phone Entry Call log TransferMessage TRANS. from How to delete the call log entry Idle mode How to save call log entry to phonebook Idle modeHow to delete the entire call log Idle mode How to access the redial list Idle modeTone ALLMelody TIME/DATEOFF Group CSET Contrast RingHandset Name PICK-UPPulse ModeBarring NumberBabycall NR CallSelect RegistrationBeep tone is emitted from the handset to UnregisterPIN PrefixMail CountryActivate SettingsMachine Answering machineON/OFF How to turn off the answering machineListen to new messages through the base Listen to new messages through the handsetPersonalized Answer onlyACC DelayEconomy Activate or Deactivate How to remotely access your answering machineCall screening on handset ScreeningDefault settings Table below describes the menu tree of your phone Menu structureMenu structure Play Rechargeable Batteries Frequently asked questionsHandset does not ring Caller Line Identification CLI service does not workCaller does not hear me Noise interference on your radio or televisionBase station 6, 9, 10, 11, 12, 18, 22, 24, 26, 28, 29, 37 Advanced Set 23, 24, 25, 26, 35 Alarm 9, 20, 33Index Unmute Unregister 25 Voice mail 17 Warranty Equipment approval Information FCC and IC statementsNotification to the local telephone company Rights of the Phone CompanyFCC RF Radiation Exposure Statement NoiseHearing Aid Compatibility HAC PrivacyRbrc seal Service Centers USA and CanadaRadio Equipment Do not attempt to repair or modify this equipment