Press 
and 
/
to select
ACTIVATE or DEACTIVATE
Press 
to save the settings
6.6.4.3How to remotely access your answering machine
Place a call from your external phone to your CD445
When the answering machine answers the call and starts playing the outgoing message, press 
to enter #
Enter the
Note
If the PIN is correct, recorded messages would be played back automatically.
However, if the PIN is incorrect, an error tone would be heard, you can retry to enter the remote access PIN again.
If retry PIN is still incorrect, the answering machine will drop the line immediately.
If there are messages, all the new messages will be played immediately and then old messages will be played after a long beep.
Press the following keys to carry out the desired function
Keys | Description |
1 | Skip to the previous message |
2 | Play the message |
3 | Skip to the next message |
6 | Delete the playing message |
7 | Turn on the answering machine |
8 | Stop message playback |
9 | Turn off the answering machine |
# | Enter the remote access code if the |
| answering machine is on and outgoing |
| message is playing |
Note
If the answering machine is off, the phone will enter into the remote access mode after
10 rings. User can then enter the
6.6.5Call screening on handset
If Call screening is set to ON, when there is an
incoming message, you can press 
to start call screening. If you decide to pick up the call, press 
. Once the call has been picked up, the recording will stop automatically.
Press 
to access the main menu
Press 
/
to select ANS. MACHINE
Press 
and 
/
to select SETTINGS
Press 
and 
/
to select
SCREENING
Press 
to select ON or OFF
Press 
to save the settings
Note
During call screening, user cannot stop the call
screening, only 
and 
/
on handset can be used.
6.6.6Call screening on base
When the answering machine picks up the call, call screening on base will be turned on if the volume level is not at 00.You can press 
to turn the base volume level to 00 to turn off the call screening on base.
32 | Answering machine |