Key 2 will not display. If voice mail number and information service number of your network operator are unavailable, Key 1 and Key 2 will display on top of Key 3 as the direct access memory options, see section 5.8.2 for details.
In idle mode :
Press 
to access the main menu
Press 
to select PHONEBOOK Press 
/
to scroll to DIRECT MEM.
Press 
and 
/
to scroll to a direct access memory location from KEY 1 to KEY 9
Press 
twice to select ADD
Press 
and 
/
to select the phonebook entry that you wish to store into the selected direct access memory
Press 
to confirm
•A beep tone is emitted and your phonebook
entry is saved into the selected direct access memory key.
Tip
Long press the direct memory key will dial out the phone number directly.
5.2.7How to transfer the phonebook This feature allows you to transfer the phonebook from one handset to another handset when there are at least two handsets registered to your base station.
In idle mode :
Press 
to access the main menu
Press 
to select PHONEBOOK Press 
/
to scroll to PHB
TRANSFER
Press 
•The handsets available for phonebook transfer are displayed.
Note
If there are more than two handsets, you can press 
/
to select a specific handset. 
The called handset will prompt with a
message “TRANS. FROM”
To accept the phonebook transfer, press 
on the called handset or press 
to reject the phonebook transfer
•All your phonebook entries are transferred to the called handset and FINISH is displayed on the two handsets screen after the transferring is done.
5.3Call log
This feature is available if you have registered to the caller identification service (CLI) with your network operator.
Your phone can store up to 50 unanswered calls. 
and the LED on the handset will blink to remind you of any unanswered calls received. If the identity of the caller is not withheld, the name (or number) of the caller will be displayed.The unanswered calls are displayed in chronological order with the most recent unanswered call at the top of the list.
!Warning
Call back from the call list may not work for all received numbers.
5.3.1How to access the call log You can review the caller ID with alternate dialing sequences.You can then make a call with the selected dialing sequence directly or store this number in your phonebook.
Press 
to access the call log
Press 
to enter CALL LIST
• The latest unanswered call is displayed.
Press 
/
to view the entries
Press 
repeatedly to view the alternate dialing sequences
The screen will scroll through the various possible dialing options (e.g. 1 + area code+ number, area code + number, 1 + number, number only).
You must choose the correct format to dial the area code and number of the call log record chosen.The original incoming number from the call log will appear as a 7, 10 or
local calls.
When viewing the call log, press 
to change the format of the call log display as it should be dialled from your location.
18 | Use more of your phone |