5.7.4.1How to activate baby call mode 
Press 
to access the main menu
Press 
/
to select ADVANCED SET
Press 
and 
/
to select BABY
CALL
Press 
to select BABY MODE
Press 
and 
/
to select ON
Press 
to save the settings
• The message BABYCALL ON will display on the idle screen.
5.7.4.2How to deactivate baby call mode 
Press and hold 
(when Baby Call mode
has been activated before).
Press 
/
to select OFF
Press 
to save the settings
• The message BABYCALL ON will disappear on the idle screen.
5.7.4.3How to change baby call number 
Press 
to access the main menu
Press 
/
to select ADVANCED SET
Press 
and 
/
to select BABY
CALL
Press 
and 
/
to select
BABYCALL NR.
Press 
to enter the number
Press 
to save the settings
5.7.5How to manually select a base station
One CD445 handset can register up to four different CD445 base stations.
Press 
to access the main menu
Scroll 
/
to select ADVANCED SET
Press 
and 
/
to select BASE
SELECT
Press 
and 
/
to select your desired base station
Press 
to confirm
5.7.6How to register an additional handset
The procedures described below are the procedures that you will find in your handset. The procedures may vary according to the handset you want to register. In this case, please refer to the manufacturer of the additional handset.
Additional handsets must be registered to a base station before you can use them. Up to 5 handsets can be registered to one base station. The Master PIN is required before you can register or unregister handsets.
Press 
on the handset to access the main menu
Scroll 
/
to select ADVANCED SET
Press 
and 
/
to select
REGISTRATION
Press 
and 
/
to select your desired base station
Note
The registered base station is marked with an asterisk at the rightmost of the display.
Press 
and enter the
Press 
on the base station for more than three seconds until you hear a beep tone. Now the base station is ready to register the new handset
Press 
on the handset to validate the PIN code
WAITING
•A beep tone is emitted from the handset to indicate successful registration and the screen
returns to idle mode.
Note
If the base is found and the PIN is correct, the unused handset numbers will be assigned automatically.
If the PIN is incorrect, WRONG PIN! will be displayed with an error tone, and the handset returns to idle mode.
If no base is found within a certain period, NO BASE will be displayed with an error tone, and the handset returns to idle mode.
24 | Use more of your phone |