3.4 Configure your phone
Depending on your country, the Welcome screen may not appear. In that case, you do not need to select the country code to configure your phone.
Before using your phone, you need to configure it according to the country of use. After charging it for a few minutes, the Welcome screen appears. Follow these steps to configure your phone:
1Press <to display the list of countries
• Available country will display on the screen.
Note
If >is pressed, the handset will show the Welcome screen again.
2Press u/dto scroll to your country
3Press <to confirm your selection
•Your phone is configured according to your
selected country and back to idle screen.
Note
Once the country is selected, the default line settings for the selected country will be applied to your phone automatically.
Tip
If you chose the country in use wrongly or would like to change the country after the first configuration, you can press <in idle mode to enter into the main menu, input ##**793 to reset to default settings. After around 30 seconds, the phone will go back to Welcome screen and you can select the country again.
3.5How to power off or on the handset power
You can power off your handset in order to save battery power.
1Press and hold efor about five seconds to power off the handset
2Press eto power on the handset again
12 | Getting started |