Philips SE170, SE175 user manual First ring, ECO mode, »» ECO is displayed

Page 26

Press MENU.

Select [ADVANCED SET] > [ECO], then press OK to confirm.

Select [ON]/[OFF], then press OK to confirm.

»» The setting is saved.

Tip

•• The carrier code contains 2 or 3 digits. For more information, contact the service provider.

Note

•• To reset the first ring status, go to the reset menu.

Activate the carrier code 1 Press MENU.

2 Select [ADVANCED SET] > [CARRIER

CODE], then press OK.

3 Enter the carrier code, then press OK to confirm.

»» The setting is saved.

Deactivate the carrier code 1 Press MENU.

2 Select [ADVANCED SET] > [CARRIER

CODE], then press OK.

3 To delete all digits, press BACK, then press OK to confirm.

»» The setting is saved.

First ring

If you have subscribed for caller ID service with your service provider, your phone can suppress the first ring before the caller ID displays on the screen. After the phone is reset, it can detect automatically if the caller ID service

is subscribed and start to suppress the first ring.You can change this setting to suit your preference.This feature only applies to models with first ring support.

Turn the first ring on/off 1 Press MENU.

2 Select [ADVANCED SET] > [FIRST RING], then press OK to confirm.

3 Select [ON]/[OFF], press OK to confirm. »» The setting is saved.

ECO mode

The ECO mode reduces the transmission power of the handset and base station.

1

2

3

»» ECO is displayed.

Note

•• When ECO is activated, the connection range between the handset and the base station can be reduced.

26EN

Image 26

Contents Register your product and get support at SE170 SE175 EC Declaration of Conformity Contents Auto clock Alarm clock Keypad lock Locate the handset StationVoltages, as defined in the standard EN 60950 Power requirementsDeclaration of conformity To avoid damage or malfunctionCompliance with EMF Disposal of your old product and batteriesEnvironmental information What is in the box Congratulations on your purchase and welcome to PhilipsLine cord Guarantee Quick start guide Overview of the phoneOverview of the base station Display icons Connect the base station Install the handsetGet started Check the battery level »» The handset starts chargingSwitch your handset On/Off What is standby mode?Check the signal strength Set the date and time formatEnd a call CallsMake a call Mute the microphone Adjust the earpiece volumeAnswer a call Turn off the ringer for all incoming callsMake a conference call Make a call to another handsetTransfer a call Toggle between callsDuring the conference call Enter text and numbers Phonebook Edit a record Direct access memoryEdit the direct access memory Delete a recordCall log Redial list Set the handset’s ringtone Set the handset’s ringtone volumePersonalize the sounds Set the key toneSelect the recall duration Call featuresDial mode Manage the area code»» ECO is displayed ECO modeFirst ring Auto clock Extra featuresAlarm clock Keypad lockPress and hold Locate the handsetUnlock the keypad »» The keypad is unlockedUnregister the handsets Enhance the audio qualityRegister the handsets Auto registrationPage Set the answering machine language Set the answer modeTurn on/off the answering machine Through the baseListen to the current announcement 1 Press Menu AnnouncementsRecord an announcement Select Answ Machine ANNOUNCEMENT, then press OK to ConfirmSet the ring delay Incoming messages ICMAccess the answering machine remotely Remote accessActivate/deactivate the remote access Behavior of the LED key on the base station Remote access commandsCall screening Default settings Technical data DisplayFrequently asked questions Handset loses connection with the baseDirective 1999/5/CE 1999/5/ECRichtlijn 1999/5/EG Som framgår av direktiv 1999/5/EG0168

Related manuals

Manual 40 pages 13.1 Kb