Philips SE175, SE170 Enhance the audio quality, Register the handsets, Unregister the handsets

13Advanced settings

Enhance the audio quality

XHD (Extreme High Definition) sound mode is an exclusive feature which transmits high fidelity signals to the handset. It makes the phone conversations sound like real-life conversations.

When you are in standby mode, 1 Press MENU.

2 Select [ADVANCED SET] > [XHD SOUND], then press OK to confirm.

3 Select [ON]/[OFF], then press OK to confirm.

»» The setting is saved.

When you are in a call,

1 Press OK to enter the options menu.

2 Change the XHD setting.

3 Press OK to confirm.

»» The setting is saved.

Register the handsets

You can register additional handsets to the base station.The base station can register up to 4 handsets.

Auto registration

1 Place the unregistered handset on the base station.

»» The handset detects the base station and start to register automatically.

»» Registration is completed in less than 2 minutes.The base station automatically assigns a handset number to the handset.

Manual registration

If auto registration fails, register your handset		lish
manually to the base station.		Eng
1	Press MENU on the handset.
2	Select [ADVANCED SET] >
3	[REGISTER], then press OK to confirm.
	Press and hold on the base station
	for 5 seconds (for the model with
	telephone answering machine, you hear a
4	confirmation beep).
	Enter the system PIN. Press BACK to
5	make corrections.
	Press OK to confirm the PIN.

»» Registration is completed in less than 2 minutes.The base automatically assigns a handset number to the handset.

Note

•• If the PIN is incorrect or no base is found within a certain period, your handset displays a notification message. Repeat the above procedure if registration fails.

Note

•• The preset PIN is 0000. No change can be made on it.

Unregister the handsets

1 If two handsets share the same base station, you can unregister a handset with another handset.

2 Press MENU.

3 Select [ADVANCED SET] > [UNREGISTER], then press OK to

confirm.

4 Enter the system PIN. (The preset PIN is 0000). Press BACK to remove the number.

EN 29