Philips CD145 Make a call Predialling, Call is initiated, Direct dialling, Call from the call Log

Page 18

press , , enter 4-digit PIN code (default PIN is 0000) and press in idle mode to its default settings.The handset will go back to country code selection screen and you can select the country code again. If country selection is not needed, the handset will go back to idle screen after reset.

3.5Register your handset You will need to register your new handset or if you wish to register the handset to a different base unit.You can register up to four handsets on a single base station.

Before entering the 4-digit PIN, press on the base unit for around three seconds when

the base is in standby mode.

1 Press , on the handset.

2Enter the default or existing 4-digit PIN code. (Default PIN is 0000)

3Press to start registration

4"--Sub--" will be displayed on

the screen

Note

If the PIN code you entered is incorrect, a long beep is emitted from the handset and the phone returns to standby mode.

16

4Using your phone

4.1Make a call

4.1.1Predialling

1Enter the phone number (maximum 24 digits)

2Press to dial the number

•The call is initiated.

4.1.2Direct dialling

1Press to take the line

2Enter the phone number

•The call is initiated.

4.1.3Call from the call

log

This feature is available if you have subscribed the Caller Line Identification service (CLI) with your network provider.

1Press to show the latest call log entry

2Press repeatedly to scroll through the list of unanswered calls to select your desired unanswered call

3Press to dial the selected number

Getting started

Page 17 Page 19
Image 18
Page 17 Page 19
Contents CD145 Register your product and get support atPage Table of contents Default settings Frequently asked questions Call in progress Phonebook Call log Redial list SettingsHow to change the remote PIN Use more of your phonePower requirements Page Use one of the following disposal options National recovery & recycling systemUsing GAP standard compliance Disposal instructions for batteriesElectric, Magnetic and Electromagnetic Fields EMF Telephone handset Base station Congratulations on your purchase and welcome to PhilipsWhat’s in the box Line cordTalk key Overview Phone Handset ACall Log keyPhonebook key Redial/Flash keyCall Transfer / Intercom / Conference Alphanumeric keypad GStar keyHHash key Program keyDisplay icons on the handset Event LED Delete keyBackward key Forward keyGetting started Connect the base StationConfigure your Phone Install rechargeable BatteriesSlide out the battery cover Place the batteries as Place the handset on Charging cradle NoteCode Country Default outgoing PressTip Direct dialling Make a call PrediallingCall is initiated Call from the call LogDisplay shows the last number dialled Call from PhonebookCall from the redial list End a callHow to use Intercom How to make a second call During a callHow to answer a Second call RecallAutomatically How to make an Internal callPress on the called handset Conference call is initiatedExternal call is put on hold automatically How to find a handsetDuring the conference call Call againCall in progress Mute/Unmute microphone During a call How to adjust earpiece volume During a callHow to store a number in the phonebook Idle mode Is shown on the displayHow to delete the entire phonebook How to access the phonebook Idle modeHow to edit the phonebook entry or Delete a number All the phonebook entries are deletedHow to access Redial list How to access the call logHow to delete the entire call log Settings How to set the time 1 PressHow to set the earpiece volume How to set the ring MelodyHow to set the ring volume How to activate/deactivate the keypad lockCurrent settings are displayed How to select recall timeHow to select dial Mode How to turn on/turn off the key ToneHow to access your voice mail number How to change the master PINHow to program voice mailbox Number New PIN is savedHow to restore to default settings Your phone is reset to its default settingsUnchanged Press Enter your 4-digit PIN How to turn off Answering machine How to set answer delayHow to record your outgoing message How to play Outgoing message How to delete outgoing messageHow to select the default outgoing Message How to play Incoming messagesHow to screen an incoming call How to remotely access yourPress and hold for two Seconds to delete all old messages How to change the remote PIN New remote access PIN Is savedKeys Description Default settings Items Default valuesCommunication is lost during a call Connection Handset does not switch onPhone does not work at all Poor audio qualitySet-up Caller ID does not work properly Is blinkingAppears Call Waiting call cannot be answeredPhonebook entry cannot be stored Caller does not hear meNoise interference on your radio or television Handset is unable to registerUnable to perform remote operation

CD145 specifications

The Philips CD145 is a staple in the world of consumer electronics, primarily known for its reliable performance and user-friendly design. Released during a period when digital technologies were rapidly evolving, the CD145 has carved out a niche among compact disc players by balancing functionality, sound quality, and affordability.

One of the most notable features of the Philips CD145 is its advanced audio processing technology. With a built-in digital-to-analog converter (DAC), the CD145 ensures that sound reproduction is both accurate and clear, allowing listeners to enjoy their favorite CDs with high fidelity. This technology minimizes distortion and enhances the listening experience, making it an ideal choice for audiophiles who value sound quality.

The design of the CD145 is both sleek and practical. Its compact form factor allows it to fit easily into various entertainment setups, while the straightforward control layout ensures that all functions are accessible without the need to navigate complex menus. Users can easily load discs, skip tracks, and adjust volume levels, making it an excellent choice for individuals seeking simplicity in their audio devices.

In terms of compatibility, the Philips CD145 supports a wide range of CDs, including standard audio CDs and CD-R/RW formats. This versatility makes it a practical option for users who have diverse collections of music. Moreover, the build quality of the CD145 offers durability, ensuring that it can withstand regular use while maintaining its performance over time.

Another feature worth noting is the CD145's anti-shock technology. This innovation minimizes the impact of external vibrations, ensuring uninterrupted playback even in less-than-ideal conditions. As a result, users can enjoy their music with confidence, knowing that the player is designed to handle everyday life without sacrificing audio quality.

Overall, the Philips CD145 represents a harmonious blend of technology and design. With its efficient audio processing capabilities, user-friendly interface, and robust build quality, the CD145 continues to be a reliable choice for anyone looking to enjoy their music collection. Whether used at home or on the go, it remains a cherished device among music lovers who appreciate the simplicity and quality it brings to their listening experience.
Top Page Image Contents