5.5.6How to select recall time
Recall time is the time delay by which the line will be disconnected after you press 
.The default value of recall time preset in your CD145 should be the best suited for your country network.You do not need to change it.
1Press 
2Press 
3Press one of the digit keys from 
through 
to select the recall time
Note
Number of available recall time options vary by different countries.
4Press 
to save the settings.
5.5.7How to select dial
mode
This dial mode setting is country dependent. Pulse mode may not be available in some countries.
1Press 
2Press 
•The current settings are displayed.
3Press 
for pulse mode or 
for tone mode
4Press 
to save the settings.
5.5.8How to turn on/turn off the key
tone
1Press 
2If the key beep is turned on before, press 
to turn off the key tone
3Press 
to save the settings.
•The keypresses thereafter will not be heard.
5.5.9How to set the auto
prefix
The maximum length of an auto prefix number is 10 digits. Once the number is set, it will be automatically inserted at the beginning of each number that will be dialled.
1Press 
, 
2Enter the detect digit where length of detect digit cannot be more than five digits
3Press 
4Enter the auto prefix number
5Press 
to save the settings
Use more of your phone | 25 |