Uniden FP105 manual Caller ID Summary, Call Review

Page 12

To make use of these features, you must first subscribe to Telstra’s Caller ID Service, There is usually a fee for this service, and may not be available in all areas.

33 MEMORY CALLER ID

 

When you use this telephone with the Caller ID service,

 

Uniden

you will see the number of the calling party (unless the call

 

is blocked or is from a silent number) before you answer

 

the phone. This telephone will store and display information

 

about the last 33 calls received. Each call is numbered in

 

the call history, together with the time and date the call was

 

received. When the memory is full, the oldest call

 

information is deleted to make room for new incoming call

 

information.

 

CALLER ID ON CALL WAITING

This feature allows you to see the number of the calling party (unless the call is blocked or is from a silent number) while you are on call. However, you must first subscribe to Telstra’s Caller ID Service and activate your call waiting service.

!To pick up the call follow steps in ACCESSING CALL WAITING on page 18.

. Caller ID on call waiting may not be available in all areas.

!If you do not subscribe to the Caller ID Service, we recommend you set the Caller ID on Call Waiting to OFF.

NEW CALL NOTIFICATION

When a new call is received, the time, date and calling number will be displayed~ between the first and second ring.

lh’iiden

Uniden

\ ,-- _-..- .

The new call LED will flash quickly when the phone is ringing, and then change to a slow flash. It will continue to flash until all new call information in the call history has been reviewed.

NEW CALL REVIEW

To review only new call information;

1.Press the mode button, and the display will show

REVIEW NEW CALL.

2.Use the << or >> buttons to view the new calls. When the display shows END OF LIST or TOP OF LIST When all new calls have been reviewed, the new call LED will stop flashing.

CALLER ID SUMMARY

The display will show the caller ID summary TOTAL CALLS XX (where XX is the total number of calls stored in the memory)

CALL REVIEW

To review all the calls in the call history, use the << or >> buttons.

When the display shows END OF LIST or TOP OF LIST, all calls have been reviewed.

!If the caller id number is longer than 76 digits, you can press the keypad digit 3 to view the next digit to the right. Press the keypad digit 1

to view the next digit to the left. The phone will

beep 4 times in quick succession when the end.

of the number has been reached.

Image 12
Contents Page Caring for Your Telephone Important NotesPlease Read Before USE and Save These Instructions IntroductionCaller ID summary VIPAC Adaptor Back-up Battery Base UnitHandset Registration card l Quick start guidePage Dispose of old batteries promptly and properly Back UP Battery Uniden FPll%Ringer Volume Base Speaker VolumeHandset Volume Handset Speakerphone Calltimer Storing ONE-TOUCH Speed Dial Numbers Pause Dialing the Stored NumbersEditing a Stored ONE-TOUCH Speed Dial Memory Deleting ONE Speed Dial MemoryDeleting ALL Speed Dial Memories Block CID To PROGRAM/RE-PROGRAM the Fixed Call FORWARD..... NumberCaller ID Summary Call ReviewMessage Bank Indicators Call Display MessagesTo Store a Name Against a Stored Phone Number Resetting a VIP Call Setting a VIP CallVIP Alert ON/OFF Speed Dialing from the VIP ListReset PP Code I Clear Speed Dial I no Changes Problem SuggestionLCD Contrast Call Wait ID ON/OFFUniden Australia PTY Limited Service Division