Uniden MC615 owner manual

Page 5

1ROTARY CHANNEL SELECTOR -Selects the desired channel. LED Numerical channel display shows CH-01 through CH-88.

2MICROPHONE CONNECTOR -Receptable for microphone connection.

3ON/OFF VOLUME -Turns power on to radio and allows adjustment to the desired listening level with clockwise rotation. Whenever the power is turned on, radio auto -

matically goes to Channel 16.

4SQUELCH -is used to quiet background noise when no signal is being received. Turn the knob just past the point at which background noise is quieted.

5DIM/BRIT SELECTOR -This control is used to adjust the brightness of the display.

61W/25W SELECTOR - Controls transmitter output power. The 1W (WATT) position should always be used for in-port or short range communications.

7CH16 SELECTOR - Provides instant CH16 by overriding Rotary Channel selector. LED indicator and Channel display will indicate when unit is on Channel 16. But if you press "OFF", the channel will go back to the one which had been selected with Rotary Channel. (That is, the channel just before you pressed "CH16".) And also Channel Display will go back to that channel.

8TX LED INDICATOR - Glows red in the transmit mode. The transmit lamp is operated from the actual presence of power transmitted to the antenna.

-5-

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Un I ~n By utilizingthe universalmountingbracket Uniden MC615Engine Noise Suppression INSTAllATIONChoosing a Location Antenna ConsiderationsPage CD@CID Rear Panel ConnectorsCH 16 LED Indicator -lightswhen CH 16 Selector is activated Channels and Functions +0.001% OCto 55C SpecificationsGeneral TransmitterReceiver 45dBPV for 12 dB Sinad 0.50pV for 20 dB SIN 18,uV 0uV 90dB Reversing the Front Panel Memo Care and MaintenanceUTUA01844EZ Ment or Payment of Incidental or Consequential Damages
Top Page Image Contents