Uniden FP104 Lift the handset from the Base, To switch back to original call, press flash then

USING YOUR FP104

PLACING A TELEPHONE CALL

1.Lift the handset from the Base.

2.Press the keypad buttons to dial the phone number you want.

3.After you have completed the phone call, place the Handset back on the Base.

RECEIVING A TELEPHONE CALL When the phone rings, pickup the Handset from the Base and begin the conversation. (Ring indicator continuously flashes until the call is picked up.)

ACCESSING THE CALL WAITING SERVICE

(Australian Model only)	memory		mute
1. While talking, you hear the call	pause	flash	redial
waiting signal (series of beep tones).

2.Press flash then 2 to switch call and put the current call on hold.

3.To switch back to original call, press flash then 1.

Note: The flash + 2 call waiting procedure toggles call between the incoming and the original call (vice versa). The

flash + 1 procedure will drop the current call connection and pick up the incoming call or the call on hold.

ACCESSING THE CALL WAITING SERVICE

(New Zealand Model only)

1.While talking you hear the Call Waiting beep signal.

2.Press flash button. This feature sends a 600mS timed “hook-flash” on telephone line for accessing services such as Call Waiting, etc.

Note: You must subscribe to Telecoms Call Waiting Service before you can use this feature.

9