Uniden FP104 manual Wall Mounting

Page 9

Be careful not to insert the mounting screws

into possible electrical hazards such as cables, wiring, or pipes.

WALL MOUNTING

You can mount your phone directly on a wall. Before mounting your phone, consider the following:

Select a location away from electrical cables, pipes or other items behind the mounting location that could cause a hazard when inserting screws into the wall.

Make sure the wall material is capable of supporting the weight of the telephone.

1.Use the screws (supplied) with anchoring devices suitable for the wall material where the telephone will be placed.

2.Gently pull and turn the Handset Retainer Tab 180˚ and release.

3.Fit the Wall Mounting Bracket to the Bottom of the telephone as shown.

4.Place the Base Unit on the screws and push down until it’s firmly seated.

5.Follow steps in Telephone Installation as shown on previous page.

INSTALLING YOUR PHONE

6

Image 9
Contents Operating Guide Page Contents Important Safety Instructions Clean your telephone using a soft damp cloth Caring for Your TelephoneImportant Notes Welcome FeaturesRegistration Card Included in Your PackageInstallation Use caution when installing or modifying telephone linesOther end into the wall outlet Wall Mounting Controls & Functions Controls & FunctionsAdjusting the ringer volume Using Your FP104To switch back to original call, press flash then While talking you hear the Call Waiting beep signalLift the handset from the Base To begin the conversation again Placing a Call on MutePick up Handset Press desired one touch speed dial button Storing One-Touch MemoriesProblem Suggestion TroubleshootingSpecifications for Australian Model SpecificationsUniden New Zealand Limited WarrantyPage Page Thank YOU