Uniden FP104 manual Installation, Other end into the wall outlet

Page 8

INSTALLING

YOUR PHONE

INSTALLATION

1.Plug one end of the Handset Cord (curly) into the Handset and the other end into the jack on the side of the telephone.

2.Plug one end of the line cord (straight) into the telephone line jack on the back of the telephone

and the other end into the wall outlet.

Note: Most phone equipment available now uses modular jacks. Phone cords are fitted with a molded plastic connector which plugs into this type of jack. If you do not have a modular phone jack, contact your local telephone company for information about their installation.

●Never install telephone wiring during a lightning storm.

●Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected.

●Use caution when installing or modifying telephone lines.

Image 8

Contents Operating Guide Page Contents Important Safety Instructions Important Notes Clean your telephone using a soft damp clothCaring for Your Telephone Features WelcomeIncluded in Your Package Registration CardOther end into the wall outlet InstallationUse caution when installing or modifying telephone lines Wall Mounting Controls & Functions Controls & FunctionsUsing Your FP104 Adjusting the ringer volumeLift the handset from the Base To switch back to original call, press flash thenWhile talking you hear the Call Waiting beep signal Placing a Call on Mute To begin the conversation againStoring One-Touch Memories Pick up Handset Press desired one touch speed dial buttonTroubleshooting Problem SuggestionSpecifications Specifications for Australian ModelWarranty Uniden New Zealand LimitedPage Page Thank YOU