Uniden FP104 manual Storing One-Touch Memories

Page 14

▼Storing One-Touch Memories

To program One-Touch Memories (1-5).

1.Pickup the Handset.

2.Press memory button.

3.Enter telephone number that you want to program.

4.Press the memory button.

5.Press the desired speed dial button (1-5).

memory

 

mute

pause

flash

redial

USING YOUR FP104

Note: Make sure to complete the storing of numbers in memory within 8 secs. Otherwise, the unit exits programming state (you will hear a series of beep tones). In this case, repeat steps 1-5.

▼Pause

During the memory storage procedure you may enter a 4 second delay between numbers (for accessing a switchboard, or long distance service) by pressing the pause button at the point in the number sequence you wish to pause. The pause button counts as one digit. Pressing pause more than once will increase the length of the pause between numbers.

▼Memory Storage Card

When you have programmed a number into the speed dial memory, write the name of the person on the Memory Storage Card (supplied).

▼Dialing Numbers from Memory

1.Pick up Handset.

2.Press desired one touch speed dial button.

11

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Operating Guide Page Contents Important Safety Instructions Important Notes Clean your telephone using a soft damp clothCaring for Your Telephone Features WelcomeIncluded in Your Package Registration CardOther end into the wall outlet InstallationUse caution when installing or modifying telephone lines Wall Mounting Controls & Functions Controls & FunctionsUsing Your FP104 Adjusting the ringer volumeLift the handset from the Base To switch back to original call, press flash thenWhile talking you hear the Call Waiting beep signal Placing a Call on Mute To begin the conversation againStoring One-Touch Memories Pick up Handset Press desired one touch speed dial buttonTroubleshooting Problem SuggestionSpecifications Specifications for Australian ModelWarranty Uniden New Zealand LimitedPage Page Thank YOU
Top Page Image Contents