5 Using your phone
5.1 Call
!Warning
This telephone is not designed for making emergency telephone calls when the power fails. Alternative arrangements should be made for access to emergency services.
5.1.1 Make a call
1Press 
and wait for the dial tone.
2Dial the number you want to call.
• The number appears on display and is dialed.
5.1.2 Call timer
The call timer shows the duration of your current call on display. It is shown in minutes and seconds (MM:SS) in the first hour. After that, it will be shown in hours and minutes (HH:MM).
5.1.3 Preparatory dialing (Pre-Dial)
With
1Enter the number you want to call.
• The number appears on display.
2Press 
.
Note
You can enter up to 24 digits. Press 
to delete an incorrect digit.
5.1.4 Redial the last number
With redialing, you can redial the last number dialed.
1Press 
.
2Press 
.
•The last dialed number appears on display and is dialed.
5.1.5Call from phonebook memory
Press 
while viewing a memory.
• The phonebook memory appears on display
and is dialed.
Note
If the number is longer than 12 digits, only the last 12 digits are shown on display.
For more details on the phonebook memory function, see “Phonebook memory”, page 15.
5.2 Answer a call
When you receive a call, the phone will ring and
will flash on the display.
Press 
to answer the call.
Note
If the ringer is turned off, the phone will not ring for the incoming call.
5.2.1Answer a call in handsfree mode The handsfree feature enables you to talk to the caller without holding onto the phone. It also allows others in the room to join in the conversation.
When you receive a call, the phone will ring and
will flash on the display.
Press 
to answer the call.
5.3 Loudspeaker phone
During a call, press 
to turn on and off the loudspeaker.
•
appears on the handset display when loudspeaker is on.
5.4Adjust the audio volume
During a call,
1press 
to increase the audio volume,
2press 
to decrease the audio volume.
5.5 End a call
Press 
during a call to end it.
12 | Using your phone |