6.3.6 Select pause duration
This option is helpful when using operator services. The default value of pause duration that is preset in your XL340 should be the best suited for your country network and therefore you should not need to change it.
In standby mode:
1Press and hold until you see MENU?.
2Enter the pause duration index number (see below).
3Press and hold until you see the new setting is displayed.
Pause duration | Index Number |
|
|
PAUSE 1 | 78 |
|
|
PAUSE 2 | 79 |
|
|
|
|
6.3.7 Select dial mode (country dependent)
The default value of dial mode that is preset in your XL340 should be the best suited for your country network and therefore you should not need to change it.
In standby mode:
1Press and hold until you see MENU?.
2Enter 60.
3Press and hold to confirm.
• The new setting is shown.
6.3.8Temporary tone dialing in pulse dial mode
If the dialing mode is set to pulse, you can press
and hold to set temporary tone dialing.
•d will be displayed on the screen. All the following digits will be dialed as tones until you hang up.
6.3.9 Set prefix insertion
The prefix insertion feature checks and formats your outgoing call number before it is dialed. If the first few digits of the number match with the
digits you set as DETECT, they will be replaced by the digits you set as PREFIX.
For example, you set DETECT as 604 and PREFIX as 967. When you are making a call to 6045551212, the actually dialed number will be 9675551212. The number shown is still 6045551212.
In standby mode:
1Press and hold until you see MENU?.
2Enter 62. Press and hold .
3Edit the DETECT digits
OR
3enter a new one if you see DETECT? (such as 604 in the above example).
4Press and hold to confirm.
5Edit the PREFIX digits
OR
5enter a new one if you see PREFIX? (such as 967 in the above example).
6Press and hold to confirm.
Note
If the dialed number starts with #, * or P, the PREFIX will not be added.
Note
Press and hold to insert a pause in PREFIX.
6.3.10Message waiting indication
If you have subscribed to the voice mail service
from your local service provider, will be on when you have a new message in your mailbox. The LED on base station will blink.
After you've listened to all the new messages, will turn off. The LED on base station will
stop blinking.
Note
You may also see VOICEMAIL shown on the display if you have new message in your mailbox, but it will disappear after you make an outgoing call.
18 | Use more of your phone |