Philips XL3402 manual Select a base, Base selection Index Number, Un-register a handset

2Enter 51. Press and hold until you see BASE?.

3Select the base using the digit keys (1, 2, 3 or

4). Press and hold until you see

SEARCHING...

4Press and hold on the base unit for 3 seconds.

•The base will turn on the LED for 30 seconds.

•If registration is successful, handset will show

REGISTERED.

Note

If registration was not successful, the handset will show FAILED. Repeat the above procedures and try again.

6.3.2 Select a base

If your handset is registered to more than 1 base, you can select which base the handset will use. You can choose a fixed base or you can allow the handset to automatically search for a nearby available base (AUTO base selection).

In standby mode:

1Press and hold until you see MENU?.

2Enter the base index number (see below).

3Press and hold to confirm.

•If successful, handset will show the selected base. Otherwise, handset will show FAILED.

Base selection	Index Number
BASE 1	64
BASE 2	65
BASE 3	66
BASE 4	67
AUTO	68

6.3.3 Un-register a handset

A handset can un-register another handset registered to the same base station. It cannot un- register itself.

In standby mode:

1Press and hold until you see MENU?.

2Enter 52. Press and hold until you see HANDSET?.

Use more of your phone

3Enter the number of the handset you want to

unregister. Press and hold to confirm.

•If un-registration is successful, your handset will show DELETED.

6.3.4 Reset your phone

You can reset your phone to factory settings. To find out what settings are being reset, see page 20.

In standby mode:

1Press and hold until you see MENU?.

2Enter 01 if you want to delete all the

memories during the reset.

OR

2Enter 02 if you want to keep the memories unchanged during the reset.

3Press and hold until you see PROCESSING....

6.3.5 Select flash duration

This option is helpful when using operator services. The default value of flash duration that is preset in your XL340 should be the best suited for your country network and therefore you should not need to change it.

In standby mode:

1Press and hold until you see MENU?.

2Enter the flash duration index number (see below).

3Press and hold until you see the new setting is displayed.

Flash duration	Index Number
FLASH 1	71
FLASH 2	72
FLASH 3	73
FLASH 4	74
FLASH 5	75
FLASH 6	76
FLASH 7	77

17