Philips XL390 Change the remote access, PIN code, Charge the handset, Set the date and time

Set the date and time

Tip

•• To set the date and time later, press [Back] to skip this setting.

1	Select [Menu] > [Phone setup] > [Date &
2	time], then press [OK] to confirm.
	Press the numeric buttons to enter the
	date, then press [OK] to confirm.
	»»The time setting menu is displayed on
	the handset.
3	Press the numeric buttons to enter the
	time.

Note

•• If the time is in 12-hour format, press / to select [AM] or [PM].

4 Press [OK] to confirm.

Change the remote access			glish
PIN code
			En
		Note
•• The default answering machine remote access PIN
	code is 0000 and it is important to change it to ensure
	the security.
1	Select [Menu] > [Answ. Machine] >
	[Remote access] > [Change PIN], then
2	press [OK] to confirm.
	Enter the old PIN, then press [OK] to
3	confirm.
	Enter the new PIN code, then press [OK]
4	to confirm.
	Enter the new PIN code again, then press
	[Save] to confirm.

»»The setting is saved.

Charge the handset

Place the handset on the base station to charge the handset.When the handset is placed correctly on the base station, you hear a docking sound.

»»The handset starts charging.

Note

•• Charge the batteries for 8 hours before first use.

•• If the handset becomes warm when the batteries are being charged, it is normal.

You can activate or deactivate the docking tone (see 'Set the docking tone' on page 22) .

Your phone is now ready to use.

EN 9