Philips XL390, XL395 Remote access, Change the PIN code, Activate/deactivate the remote access

Remote access

You can operate your answering machine when you are away from home. Simply make a call to your phone with a touch tone phone and enter your 4-digit PIN code.

Note

•• The remote access PIN code is the same as your system PIN.The preset PIN is 0000.

Change the PIN code

1	Select [Menu] > [Answ. Machine] >
	[Remote access] > [Change PIN], then
2	press [OK] to confirm.
	Enter the old PIN, then press [OK] to
3	confirm.
	Enter the new PIN code, then press [OK]
4	to confirm.
	Enter the new PIN code again, then press
	[Save] to confirm.

»»The setting is saved.

Activate/deactivate the remote access

You can allow or block remote access to the answering machine.

1	Select [Menu] > [Answ. Machine] >
	[Remote access], then press [OK] to
2	confirm.
	Select [Activate]/[Deactivate], then press
	[OK] to confirm.

»»The setting is saved.

Access the answering machine remotely

1	Make a call to your home number with a
2	touch tone phone.
	Enter # when you hear the announcement.
3	Enter your PIN code.

»»You now have access to your answering machine, and you can listen to the new messages.

Note

•• You have 2 chances to enter the correct PIN code, before your phone hangs up.

4 Press a key to carry out a function. See the 'Remote access commands' in the following table for a list of available functions.

Note

•• When there is no message, the phone hangs up automatically if no key is pressed for 8 seconds.

Remote access commands

Key Function

1Repeat the current or listen to the previous message.

2Listen to messages.

3Skip to the next message.

6Delete the current message.

7Switch the answering machine on.

(not available when you listen to the messages).

8Stop listening to the message.

9Switch the answering machine off.

(not available when you listen to the messages).

English

EN 33