To use Block Recognizer:
With the Block Recognizer, you can input character strokes that are similar to those used on other devices.
1.Tap 
> Block Recognizer.
2.Write a letter within the writing area.
When you write a letter, it is converted to a typed text that appears on the screen. For instructions and a demonstration on using the Block Recognizer, tap
next to the writing area.
To use Transcriber:
With Transcriber, you can use the stylus to write anywhere on the screen as you would on paper. Unlike Letter Recognizer and Block Recognizer, you can write a sentence or additional information. Pause after writing and let Transcriber convert the written characters to typed characters.
1.Tap 
> Transcriber.
2.Write anywhere on the screen.
For instructions and demonstration on using Transcriber, with Transcriber open,
tap at the lower right corner of the screen.
To edit typed text:
1.Select the text that you wish to edit using either one of the following:
•drag the stylus over the text
•tap twice to select a word
•tap three times to select a paragraph
2.Tap Menu on the Menu bar and select an action, or use one of the tools in the Input Panel to enter a new text.
Basics | 13 |