Connecting the Cradle to a Computer
The cradle has a USB cable for connection to a computer. Connect the end of the cable to a USB port of the computer to which you want to connect.
Important
•See “Required System Configuration” on page 24 for details on the type of computer system required for use with the cradle.
USB port
•The above illustration is one example of possible connection configurations. The locations and layouts of USB ports vary from computer to computer. See the documentation that comes with your computer for full details on connecting cables to it.
•Note that after connecting the cradle to your computer, you also need to make certain PC Connect software settings on your computer to enable data transfers. See the Quick Start Guide for information about how to install PC Connect, and PC Connect online help for information about how to use it.
Using the CASSIOPEIA USB Cable
You can use the CASSIOPEIA USB cable to connect the CASSIOPEIA directly to a computer.
Important 
•See “Required System Configuration” on page 24 for the computer system that is required for direct USB connection.
•The illustration below is just one possible connection configuration. The location and layout of USB ports vary from computer to computer. See the documentation that comes with your computer for full details on connecting cables to it.
•You must have PC Connect software installed on your computer in order to exchange data with the CASSIOPEIA over a USB connection. See the Quick Start Guide for information about how to install PC Connect, and PC Connect online help for information about how to use it.
22