Casio BE-300 manual Specifications, RAM 16MB

Page 44

Specifications

Model:

BE-300

Display:

240 320 dots

 

STN Color LCD (32,768 colors)

CPU:

VR4131

Memory:

ROM 16MB Flash ROM

 

RAM 16MB

Interfaces:

Serial: RS-232C, 115.2 kbps max.

 

USB (Client)

Card Slot:

CompactFlash card, 3.3V Type I/TypeII

Headphone jack: ø 3.5 mm stereo output

Accepts monaural earphone, stereo earphones/headphones

Power Supply

Rechargeable battery (Lithium-Ion battery) AC adapter (AD-C59200)

Power Consumption: 3.0W

Approximate Battery Life (Normal Temperature)

(Actual time may be shorter due to conditions when charging.)

1 week: Based on normal use

4 hours: Continuous input and data display at a ratio of 1:10, with screen brightness at lowest possible level.

Even when the unit is turned off, small amounts of power are required to retain memory contents, etc. This can cause batteries to go dead even when you do not use the unit.

The actual amount of operation time that can be expected from batteries depends on operating conditions, settings, and other variables.

Approximate Charge Time (Normal Temperature)

3 to 4 hours: Charge time is longer for the first charges after purchasing the unit or installing a new battery pack.

Operating Temperature: 0°C to 40°C (32°F to 104°F)

Charging Temperature: 10°C to 35°C (50°F to 95°F)

Dimensions: 17.9 H 76.0 W 121.0 D mm (3/4"H 3"W 4 3/4"D) (Excluding cover and projections.)

Weight: Approximately 170 g (6.0 oz) (Including cover.) Approximately 158 g (5.6 oz) (Excluding cover.)

44

Image 44
Contents BE-300 Page Markings and Symbols Safety PrecautionsHealth Precautions Precautions During Use Built-in Battery Pack Memory ProtectionLocation Avoid unstable surfacesAC Adapter Display Screen Precautions Operating Precautions Page Built-in Battery Pack Service Life Disposing of Your CassiopeiaConnector Contents Terms and Symbols used in this manual User MaintenanceInitial Setup Getting ReadyWhere to go for information What should I do after reading this Hardware Manual?Operations General GuideUsing the Stylus Recalibrating the Touch Screen Adjusting Display ContrastRemoving the cover Using the Cradle Adjusting Display BrightnessAdjusting Auto Dimming Settings Changing the Cradle Configuration To remove the Cassiopeia from the cradle Using the Cassiopeia USB Cable Connecting the Cradle to a ComputerUsing the Cassiopeia Serial Cable To connect to a computer using the Cassiopeia USB cableRequired System Configuration To connect to a computer using the Cassiopeia serial cablePage Using the AC Adapter Direct Connection Cradle ConnectionUsing a CompactFlash Card Storage CardTo install a CompactFlash card Using a PC Card Unit To connect your Cassiopeia to the PC Card UnitTo remove the Cassiopeia from the PC Card Unit About Modem Adapter U.S. and Canada OnlySoftware Applications Low Battery Warning and Data Storage User MaintenanceAbout the CASSIOPEIA’s built-in rechargeable battery Charging the Battery Pack Page Resetting the Cassiopeia and Restoring Data To reset your CassiopeiaWhat to do if resetting does not solve the problem Restoring DataTo restore data backed up to a computer To restore data backed up to a storage card MemoPage Restoring Factory Defaults To restore your Cassiopeia to its factory defaultsPage Troubleshooting Page Appendix Button OperationsSpecifications RAM 16MBRegulatory Information FCC WarningUnit 6, 1000 North Circular Road London NW2 7JD, U.K Hon-machi 1-chome Shibuya-ku, Tokyo 151-8543, Japan