Resetting the CASSIOPEIA and Restoring Data
What does resetting the CASSIOPEIA do?
Resetting your CASSIOPEIA is the same as restarting your computer. Performing a reset causes any data you are working on but have not saved yet to be lost, but data saved in memory and other settings are basically left unchanged.
You should perform the reset operation whenever your CASSIOPEIA behaves abnormally due to operational error or some other problem. The reset operation is required in the following cases.
•When there is no response when you tap the screen or press a button
•When the icon that indicates some operation is in progress continues to rotate on the screen for a long time
Important
•Check to make sure the 
icon is not in the system tray before you press the reset button.
•Performing the reset operation causes all user files and folders that are not contained in the My Device\Nand Disk folder to be deleted. To keep a file or folder from being deleted by the reset operation, store it in the My Device\Nand Disk folder or on a storage card.
•Though saved data is normally not lost when you perform a reset operation, abnormal data in memory can cause all saved data to be cleared. Because of this, you should always back up data to a storage card whenever possible before performing a reset operation.
To reset your CASSIOPEIA
1.Turn on your CASSIOPEIA.
2.Use the stylus to press the [Reset] button.
3.The message “Starting...” appears on the display to let you know that the reset operation is starting.
34