Navigon MN4 user manual Software registration and activation, Entering this code

User's manual BLUE Edition

code.

Notice: Depending on the battery charging state, it may happen that you have to charge the device for a while before the installation may be executed.

2.2.3Software registration and activation

Activation code	At the first start of MobileNavigator you will be prompted to
	enter an activation code. You cannot start the software without
	entering this code.

To obtain the activation code, you will need the serial number, which is printed on the back of the MobileNavigator booklet and the Hardware-ID, which is indicated at the first start of the software.

With these two numbers you may obtain the activation code:

in the web on www.navigon.com

by SMS: simply send the serial number, device ID, your first name surname and email address (separated by commas) to: +49 (0) 176 – 888 333 88 or

by phone from our support staff:

+49 180-5-6284466 (dtms-Service, 0,12 €/min).

Installation and quick-start guide - 12 -