Navigon MN4 user manual Installation in the vehicle

User's manual BLUE Edition

2.2.4Installation in the vehicle

Attention: The mounted holder must not impede the driver’s attention on the traffic. If this is not possible, mount the holder somewhere else so that safe driving is granted.

Mounting the	1.	Attach the cradle of the device to the swan-neck mount.
holder...
		Notice: Take notice of the inscription on the swan-neck
		mount. The arrow with the inscription close must show in
		snap-on direction. The connection must snap on audibly.
	2.	Place the suction cup on the windscreen. Press the lever
		firmly to the windscreen before switching it.
	3.	Insert the device into its holder. First place the bottom of the
		device correctly, then push it backwards until it snaps into the
		clip.

4.Insert the chinch jack of the power supply cable into the respective socket at the bottom of the device.

5.Insert the power jack into the cigarette lighter.

Installation and quick-start guide - 14 -