User's manual BLUE Edition
2.2.5Fitting MobileNavigator on your bike
Mount the fitting...
1.Connect the clamp 
and the mounting plate 
. Pull the clamp round the handle bar as represented above (opening up, plate towards the driver). Do not forget to put the rubber band 
which is included in the delivery between the handle bar and the clamp. The clamp is flexible, so you can open it carefully, place it round the handle bar and close it.
2.Put the cradle of the device 
onto the mounting plate 
. Push the holder downwards until it snaps in noticeably. Please note that there is only one correct position for the holder to be fitted.
3.Fix the complete holder kit with the included screw 
. Fasten the screw only slightly for the moment.
4.Insert the device into its cradle. Verify that the clip snaps noticeably!
5.Turn the holder until you may read the screen well while sitting on the bike.
6.Fasten the screw.
Installation and | - 15 - |