RoyalTek RTW-1000 operation manual Initial SET-UP of the Pocket PC, Charging the Pocket PC Battery

Page 10

RTW-1000 Operational Manual

INITIAL SET-UP OF THE POCKET PC

The following section provides a friendly step-by-step guide that assist you through the initial set up of the Empus Pocket PC.

STEP 1: CHARGING THE POCKET PC BATTERY

The Empus Pocket PC can be conveniently charged with either the supplied AC adaptor or the optional USB dock.

1.Slide the adaptor plug into the guide rail at the back of the AC adaptor. Plug the AC adaptor into a wall outlet that is easily accessible.

2.The charging status display flashes green until the Pocket PC is charged. Do not interrupt the charging process before the battery is fully charged. This may take a few hours. The Pocket PC is fully charged if the charging display lights green. (Remember to charge the Empus Pocket PC for at least 10 hours for the first time.)

3.Leave the mains adapter connected to the Pocket PC for around 24 hours, so that the backup battery also charges-up fully.

~ 10 ~

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Empus Index Care of the Display MaintenanceRead ME First Supplied ItemsDevice Initialization Getting Started View Components Front ViewRTW-1000 Operational Manual Left View Bottom ViewTOP View Right ViewUSB Docking Station Charging the Pocket PC Battery Initial SET-UP of the Pocket PCClick Install ActiveSync Switching on the Pocket PC Connecting to the ComputerUsing the Pocket PC Operating the Pocket PCInserting Memory Cards Accessing Memory CardsWorking with Memory Cards Removing Memory CardsData Exchange VIA Card Reader SOFT-RESET Resetting the Pocket PCHARD-RESET Using the Navigation PAD Using the StylusBasic Skills Status Icons Icon MeaningIcon GPS Navigation Software NavigationTips for Navigation GPS Diagnose Starting NavigationFAQ Customer Service Faults and Possible Causes~ 24 ~ Additional Support
Top Page Image Contents