RoyalTek RTW-1000 operation manual GPS Diagnose, Starting Navigation

RTW-1000 Operational Manual

GPS DIAGNOSE

There are two ways to turn on/off your Empus Pocket PC's GPS function manually.

1.Thru embedded software. Users will notice the GPS icon on the button right of the Today screen. Tab on it will bring up a quick diagnose window, which allows the users to switch on and off the GPS function of the Empus Pocket PC manually.

2.Thru embedded hotkey operation. The GPS function of the Empus Pocket PC can be turned on/off by operating the GPS button on the right side of the Empus Pocket PC (see page 8). By holding the GPS button, the users will be able to detect the change in GPS status by the change of color of the GPS icon. The green GPS

icon represents the Empus Pocket PC is running with the GPS

function turned on. The red GPS icon represents the Empus Pocket PC is running with the GPS function turned off.

Note: Normally, the GPS function of the Empus Pocket PC will be automatically turned on by the navigation system.

STARTING NAVIGATION

1. Switch on the Pocket PC.

Start the navigation program in the program directory of your Pocket PC.

²Hint: The GPS-receiver will require some minutes for initialization when deployed for the first time. Even when GPS

signal reception is indicated the navigation could be imprecise. In all future instances it will take about 30-60seconds until a correct GPS-signal is available.

2.Click on Enter a destination to specify your destination. In order to obtain detailed information about how to use the program click on the Help button.

~ 21 ~